When you click in a 2D drawing view and then press the rotate button, you can rotate the part around all axis.
To get back to the printable mode, you'll have to press the home button. ( look at the picture above )
important information for eDrawings: in the print menu in the upper area you have 4 option boxes

1. print shaded ( for standard plotting turn OFF )
2. print in color OFF
3. draft quality OFF
4. scale to fit ON

button: print properties > you must set the print orientation !!
a. Portrait (vertical page orientation)
b. Landscape (horizontal page orientation)

More complicate parts will be distributed in a simplified eDrawing showing the tolerances, but also in STEP and IGES format. This will give all users of 3D CAD / CAM systems the possibility to import these parts.

Sheet metal parts will also be distributed in a simplified eDrawing showing them in bend situation, but also in DXF format. This will give all users of 2D CAD systems ( laser cutting ) the possibility to import these parts.
>> There is a layer named CUTTING in red color, the rest is bending lines or center holes etc. <<

Drawing numbering system:

3d-X-000-00 = 3D eDrawing / complete machine / number 000 ( same as item # ) / revision 00
3d-A-000-00 = 3D eDrawing / group A / number 000 / revision 0
a4-A-001-04 = a4 printable eDrawing / group A / number 001 ( item 1 ) / revision 4
a0-B-023-01 = a0 printable eDrawing / group B / number 003 ( item 23 ) / revision 1
st-C-044-00 = 3D STEP / group C / number 044 ( item 44 ) / revision 0
ig-C-044-00 = 3D IGES / group C / number 044 ( item 44 ) / revision 0
dx-D-065-00 = 2D DXF / group D / number 065 ( item 65 ) / revision 0

New = changed since the previous upload.

ShapePro is not responsible for any problem arising from the hole process described within this website.